Skidding Winches

• Economical Manual Control (M) 
• Full protective screen
• Ideal for sub compact tractors

The Uniforest 30 M skidding winch is ideally suited for your sub-compact tractor. This unit is rated for 11 to 25 horsepower and has 6600 lbs of pull. The main cable is 165 feet long and is 3/8” thick. It comes with 3 Cable Sliders and a Swivel End Fitter to attach multiple logs. The unit weighs in at 407 lbs and is a category I hitch.

Make quick, safe work of your firewood or sawmill logs harvesting. The 165 feet of cable allows you to keep your tractor on solid ground and bring the logs to you. This also makes your operation low impact on the environment. Middle speed of cable is 3 ft/sec., blade width is 3.3′, front to back is 1.4′, winch height is 3.5′, overall height is 6.6′ and fits a category 1.

• Tractive Force Lower Cable Position..... 6,600 lbs
• Power Required HP..... 15-33
• Wireless Remote..... No
• Standard Cable..... 165′ x 3/8
• Middle Speed of Cable ft/sec..... 3 ft/sec
• Weight..... 407lbs
• Blade Width ft..... 3.3ft
• Front to Back..... 1.4 ft
• Winch Height..... 3.5ft
• Overall Height..... 6.6 ft
• Category..... 1

• Manual Control  
• Extra length cable  
• Lower snatch blocks  
• Removable trailer hitch  
• Full protective screen  
• Place for a chainsaw

The Uniforest 35 M skidding winch is ideally suited for your compact tractor. This unit is rated for 16-45 horsepower and has 7700 lbs of pull. The main cable is 230 feet long and is 3/8” in diameter. It comes with 3 Cable Sliders and a Swivel End Fitter to attach multiple logs. The unit weighs in at 540 lbs and is a category I & II hitch. The 35M comes standard with upper and lower pulley, chainsaw scabbard, trailer hitch, and PV holder.

Make quick, safe work of your firewood or sawmill logs harvesting. The 230 feet of cable allows you to keep your tractor on solid ground and bring the logs to you. This also makes your operation low impact on the environment.

• Tractive Force Lower Cable Position..... 7,700 lbs
• Power Required HP..... 15-44
• Wireless Remote..... No
• Standard Cable..... 230′ x 3/8
• Middle Speed of Cable ft/sec..... 3 ft/sec
• Weight..... 540lbs
• Blade Width ft..... 3.9ft
• Front to Back..... 1.5 ft
• Winch Height..... 3.8ft
• Overall Height..... 6.6 ft
• Category..... 1 & 2

• Manual Control  
• Extra length cable  
• Lower snatch blocks  
• Removable trailer hitch  
• Full protective screen  
• Place for a chainsaw

The Uniforest 45 M Skidding Winch is rated for 30 to 60 horsepower and has 9900 lbs of pull. The main cable is 230 feet long and is 7/16” in diameter. It comes with 3 Cable Sliders and a Swivel End Fitter to attach multiple logs. The unit weighs in at 767 lbs and is a category I & II hitch. The 45M comes standard with upper and lower pulley, chainsaw scabbard and PV holder.

Make quick, safe work of your firewood or sawmill logs harvesting. The 230 feet of cable allows you to keep your tractor on solid ground and bring the logs to you. This also makes your operation low impact on the environment.

• Tractive Force Lower Cable Position..... 9,900 lbs
• Power Required HP..... 30-60
• Wireless Remote..... No
• Standard Cable..... 230′ x 7/16
• Middle Speed of Cable ft/sec..... 3 ft/sec
• Weight..... 767lbs
• Blade Width ft..... 4.6ft
• Front to Back..... 1.6 ft
• Winch Height..... 4.4ft
• Overall Height..... 6.6 ft
• Category..... 1 & 2

• Efficient Wireless Control  
• Extra length cable  
• Lower snatch blocks  
• Removable trailer hitch  
• Full protective screen  
• Place for a chainsaw

The 45H Log Skidding Winch has 9900 lbs of tractive force, lower cable position, requires 30-60 HP, remote control available, 230’x7/16 of standard cable, 4.6ft blade width, 1.6 ft front to back, 4.4 ft winch height, 6.6 ft overall height and 1 and 2 category. It comes with 3 Cable Sliders and a Swivel End Fitter to attach multiple logs.

1. Electromagnetic globe valves (no leaks or pressure losses).
2. Hydraulic components (tank, cylinders…) are galvanic anticorrosion protected.
3. Pump driven through gear drive.
4. All hydraulic components are fitted into the winches framework and therefore protected from damage and weather events. 
5. Three-plates clutch from thick sheet metal, therefore there is no tear in the boreholes.
6. Safety pin to keep the wire rope from falling out at the lower pulley.
7. The lower pulley attached using a magnet.
8. Devise for unwinding wire rope is available.
9. Drive elements that are exposed to stress and wear are thermally treated (mended and induction hardened).
10. Sealed bearings no lube required.
11. More built in compartments for chains and other equipment.
12. Chainsaw scabbard and pix axe holder.
13. Trailer coupler storage on winch frame so that it can be put away when not in use but still with the unit.
14. Fold down safety screen so the unit can be placed in storage with low overhead clearance.
    

• Tractive Force Lower Cable Position..... 9,900 lbs
• Power Required HP..... 30-60
• Wireless Remote..... Yes
• Standard Cable..... 230′ x 7/16
• Middle Speed of Cable ft/sec..... 2 ft/sec
• Weight..... 840lbs
• Blade Width ft..... 4.6ft
• Front to Back..... 1.6 ft
• Winch Height..... 4.4ft
• Overall Height..... 6.6 ft
• Category..... 1 & 2

WEIGHT: 855LBS • WINCH HEIGHT: 4.7FT

• Economical Manual Control (M)  
• Extra length cable  
• Lower snatch blocks  
• Removable trailer hitch  
• Full protective screen  
• Place for a chainsaw

This winch is suitable for connection to medium-sized tractors, choose between two different heights of attachment to the tractor. The 55M Uniforest Log Skidding winch has 12,100lbs of tractive force, lower snatch block, requires 45-80 HP, and has 230’x7/16 of standard cable, weighs 855 lbs, has a blade width of 5.2 ft, 1.6 ft from front to back, 4.7 winch height, overall height is 7.5 ft and is a 1 and 2 category. It comes with 3 Cable Sliders and a Swivel End Fitter to attach multiple logs.

1. Upgrades three blade clutch is made out of thicker metal with elevates tears in bore holes.
2. Brake control system has been located inside of winch frame to better protect it from damage and weather.
3. Safety pin has been added to the lower pulley to keep cable in pulley from falling out of place.
4. The lower pulley has a magnet that keeps it out of the way while not in use.
5. Heat treated wear drive elements.
6. Large diameter and width brake belt.
7. Sealed bearings no lube required.
8. More built in compartments for chains and other equipment. 
9. Chainsaw scabbard and pix axe holder.
10. Trailer coupler storage on winch frame so that it can be put away when not in use but still with the unit.
11. Fold down safety screen so the unit can be placed in storage with low overhead clearance.
    

• Tractive Force Lower Cable Position..... 12,100 lbs
• Power Required HP..... 45-80
• Wireless Remote..... No
• Standard Cable..... 230′ x 7/16
• Middle Speed of Cable ft/sec..... 3 ft/sec
• Weight..... 855lbs
• Blade Width ft.... 5.2ft
• Front to Back..... 1.6ft
• Winch Height..... 4.7ft
• Overall Height..... 7.5 ft
• Category..... 1 & 2

WEIGHT: 870LBS • WINCH HEIGHT: 4.7FT  

• Efficient Wireless Control (H)  
• Extra length cable  
• Lower snatch blocks  
• Removable trailer hitch  
• Full protective screen  
• Place for a chainsaw

The 55H winch is suitable for connection to medium-sized and slightly larger tractors, hydraulic system and electromagnetically controlled seat valves, hydraulic components, integrated in the column, are protected from damage and weather, multi-blade clutch, lower pulley and serial connection, built-in sealed bearings, lubrication is not required, the possibility of attachment at 2 different heights.

The 55 H Uniforest Log Skidding winch has 12,100 lbs. of tractive force, lower cable position, requires 45-80 HP, wireless remote control available, 230’x 7/16 of standard cable, weighs 1100 lbs, blade width of 5.2 ft., 2.5 ft front to back, 4.7 ft winch height, 7.5 ft overall height and category 1 and 2. It comes with 3 Cable Sliders and a Swivel End Fitter to attach multiple logs.

1. Electromagnetic globe valves (no leaks or pressure losses).
2. Hydraulic components (tank, cylinders…) are galvanic anticorrosion protected
3. Pump driven through gear drive.
4. All hydraulic components are fitted into the winches framework and therefore protected from damage and weather events.
5. Three-plates clutch from thick sheet metal, therefore there is no tear in the boreholes.
6. Safety pin to keep the wire rope from falling out at the lower pulley.
7. The lower pulley attached using a magnet.
8. Devise for unwinding wire rope is available.
9. Drive elements that are exposed to stress and wear are thermally treated (mended and induction hardened).
10. Sealed bearings no lube required.
11. More built in compartments for chains and other equipment.
12. Chainsaw scabbard and pix axe holder.
13. Trailer coupler storage on winch frame so that it can be put away when not in use but still with the unit.
14. Fold down safety screen so the unit can be placed in storage with low overhead clearance.

• Tractive Force Lower Cable Position..... 12,100 lbs
• Power Required HP..... 45-80
• Wireless Remote..... Yes
• Standard Cable..... 230′ x 7/16
• Middle Speed of Cable ft/sec..... 2 ft/sec
• Weight..... 870lbs
• Blade Width ft..... 5.2ft
• Front to Back..... 1.6 ft
• Winch Height..... 4.7ft
• Overall Height..... 7.5 ft
• Category..... 1 & 2

• Efficient Wireless Control (H)  
• Extra length cable  
• Lower snatch blocks  
• Removable trailer hitch  
• Full protective screen  
• Place for a chainsaw

The 65 H log skidder winch is suitable for connection to medium and large tractors, hydraulic system and electromagnetically controlled seat valves, hydraulic components, integrated in the column, are protected from damage and weather, multi-blade clutch, lower pulley and serial connection, built-in sealed bearings, lubrication is not required, the possibility of attachment at 2 different heights, It comes with 3 Cable Sliders and a Swivel End Fitter to attach multiple logs.

1. Electromagnetic globe valves (no leaks or pressure losses).
2. Hydraulic components (tank, cylinders…) are galvanic anticorrosion protected.
3. Pump driven through gear drive.
4. All hydraulic components are fitted into the winches framework and therefore protected from damage and weather events.
5. Three-plates clutch from thick sheet metal, therefore there is no tear in the boreholes.
6. Safety pin to keep the wire rope from falling out at the lower pulley.
7. The lower pulley attached using a magnet.
8. Devise for unwinding wire rope is available.
9. Drive elements that are exposed to stress and wear are thermally treated (mended and induction hardened).
10. Sealed bearings no lube required.
11. More built in compartments for chains and other equipment.
12. Chainsaw scabbard and pix axe holder.
13. Trailer coupler storage on winch frame so that it can be put away when not in use but still with the unit.
14. Fold down safety screen so the unit can be placed in storage with low overhead clearance.

• Tractive Force Lower Cable Position..... 14,300lbs
• Power Required HP..... 55-90
• Wireless Remote..... Yes
• Standard Cable..... 260′ x 7/16
• Middle Speed of Cable ft/sec..... 2 ft/sec
• Weight..... 1232lbs
• Blade Width ft..... 5.9ft
• Front to Back..... 2.5 ft
• Winch Height..... 5.4ft
• Overall Height..... 7.5 ft
• Category..... 2 & 3

• Economical Manual Control (M)  
• Extra length cable  
• Lower snatch blocks  
• Removable trailer hitch  
• Full protective screen 
• Place for a chainsaw

The 85M winch is suitable for medium sized tractors and larger tractors as well. The brake control mechanism is installed in the winch frame and protected from damage and weather influences. It comes with 3 Cable Sliders and a Swivel End Fitter to attach multiple logs.

1. Upgrades three blade clutch is made out of thicker metal with elevates tears in bore holes.
2. Brake control system has been relocated inside of winch frame to better protect it from damage and weather.
3. Safety pin has been added to the lower pulley to keep cable in pulley from falling out of place.
4. The lower pulley now has a magnet that keeps it out of the way while not in use.
5. Heat treated wear drive elements.
6. Large diameter and width brake belt.
7. Sealed bearings no lube required.
8. More built in compartments for chains and other equipment.
9. Chainsaw scabbard and pix axe holder.
10. Trailer coupler storage on winch frame so that it can be put away when not in use but still with the unit.
11. Fold down safety screen so the unit can be placed in storage with low overhead clearance.

• Tractive Force Lower Cable Position..... 18,700 lbs
• Power Required HP..... 70+
• Wireless Remote..... No
• Standard Cable..... 295′ x 1/2″
• Middle Speed of Cable ft/sec..... 2 ft/sec
• Weight..... 1241lbs
• Blade Width ft..... 5.9ft
• Front to Back..... 2.5 ft
• Winch Height..... 5.4ft
• Overall Height..... 7.5 ft
• Category..... 2 & 3

• EFFICIENT WIRELESS CONTROL (H)  
• Extra length cable  
• Lower snatch blocks  
• Removable trailer hitch  
• Full protective screen  
• Place for a chainsaw

The 85H winch is suitable for connection to large tractors. It the biggest and the best. Comes with 3 Cable Sliders and a Swivel End Fitter to attach multiple logs.

1. Electromagnetic globe valves (no leaks or pressure losses).
2. Hydraulic components (tank, cylinders…) are galvanic anticorrosion protected.
3. Pump driven through gear drive.
4. All hydraulic components are fitted into the winches framework and therefore protected from damage and weather events.
5. Three-plates clutch from thick sheet metal, therefore there is no tear in the boreholes.
6. Safety pin to keep the wire rope from falling out at the lower pulley.
7. The lower pulley attached using a magnet.
8. Devise for unwinding wire rope is available
9. Drive elements that are exposed to stress and wear are thermally treated (mended and induction hardened).
10. Sealed bearings no lube required.
11. More built in compartments for chains and other equipment.
12. Chainsaw scabbard and pix axe holder.
13. Trailer coupler storage on winch frame so that it can be put away when not in use but still with the unit.
14. Fold down safety screen so the unit can be placed in storage with low overhead clearance.

• Tractive Force Lower Cable Position..... 18,700lbs
• Power Required HP..... 70+
• Wireless Remote..... Yes
• Standard Cable..... 295′ x 1/2″
• Middle Speed of Cable ft/sec..... 2 ft/sec
• Weight..... 1312lbs
• Blade Width ft..... 5.9ft
• Front to Back..... 2.5 ft
• Winch Height..... 5.4ft
• Overall Height..... 7.5 ft
• Category..... 2 & 3